PU adhesive

MFiX Verin


MFiX Verin is a single component polyurethane based elastomeric selaant which cures under the effect of ambient humidity. It is specially used for sealing metal jack (for raised floors) on concrete.
 
Technical data:
  • Skin formation time:       60 min
  • Shore A hardness:          45 Shore A
  • Elongation at break:        400%
  • Temperature resistance: -40°C - +90°C 

Packaging: 600 ml (sausages)
 
TDS
SDS

 
 

MFiX PU 40


MFiX PU 40 is a single component polyurethane based elastomeric sealant. It forms a joint of high elasticity and has a good resistance to tear and to weather.

It's specially adapted for bonding vaious building materials and for expansion joints.

Technical data:
  • Skin formation time:        60 min
  • Shore A hardness:          40 Shore A
  • Elongation at break:        >500%
  • Temperature resistance: -40°C - +90°C

Packaging: 600 ml (sausages)
  SDS
DOP

 
 

MFiX PU 50


MFiX PU 50 is a single component, fast cure, polyurethane based elastomeric sealant. It forms a joint of high elasticity and has a good resistance to tear and to weather.

This sealant adheres withour primer on substrates commonly used, like wood, anodized aluminium, polyester, concrete, glass.

Technical data:
  • Skin formation time:        40 min
  • Shore A hardness:          55 Shore A
  • Elongation at break:        400%
  • Temperature resistance: -40°C - +90°C

Packaging: 290 ml (cartridge), 600 ml (sausages)
  SDS
DOP

 
 

MFiX PU 60 HV


MFiX PU 60 HV is a single component polyurethane based elastomeric sealant which cures under the effect of atmospheric humidity to form a flexible and resistant joint.

It can be used for bonding different materials in the general industry.

Technical data:
  • Skin formation time:        55 min
  • Shore A hardness:          55 Shore A
  • Elongation at break:        300%
  • Temperature resistance: -40°C - +90°C

Packaging: 600 ml (sausages)
  SDS

 
 

MFiX 763


MFiX 763 is an ambient moisture curing one-component polyurethane sealant. It can be used to bond windshield and side windows of cars with or without a primer.

Technical data:
  • Skin formation time:       15 min
  • Shore A hardness:          55-60 Shore A
  • Elongation at break:        700%
  • Temperature resistance: -40°C - +120°C

Packaging: 600 ml (sausages)
  SDS

 
 

DiPUR 522


DiPUR 522 is designed for manual gluing of foamed polystyrene, XPS, PUR foam, miner and glass wool, board with metal plates, facings made of plastics, building paper, concrete slabs, wood and other materials. The adhesive is most useful for gluing on vertical surfaces. Read for use adhesive is strongly hydrophobic and can be applied even in hard conditions.

 

 
 

Dipur 2.C4 (2K)


DiPUR 2C.4 is a two-component solventless polyurethane adhesive designed for structural bonding of corners in aluminium windows and doors manufacture. The adhesive can also be used for pressure bonding of all kind insulation materials, cardboard-gypsum panels and GFK panels with metal sheet, PVC, polyester laminate, wood, concrete (after previous grounding) and other materials. The adhesive components are packed into tandem cartridges with manual or pneumatic gun.