New products

MFiX Rapidhab

MFiX Rapidhab is a one-component polyurethane adhesive hardening due to air humidity. The adhesive is manufactured in compliance with requirements of ISO 9001:2015 standard.


  • Gypsum board, OSB
  • Windowsill, stair
  • Decorative elements
  • Autoclaved Aerated Concrete


  • Fast initial tack after 1 min
  • Open time: max. 2 min
  • Correction time: max. 5 min
  • Mechanical time: minimum 2 hour
  • Gun grade
  • Low expansion
  • Easy to use
  • Yield: 40 m
  • Applicable on vertical and horizontal surfaces

Data sheets:



MFiX Mounting Adhesive

MFiX Mounting Adhesive is one-component mounting adhesive based on water dispersion, recommended for bonding various building materials used in finishing and repair works to absorbent surfaces as: concrete, plaster, chipboard, wood, plasterboard, gypsum.

  • fast and durable initial tack
  • product exhibits excellent adhesion to most common building and finishing materials such as polystyrene, ceramic tiles, wood, metal and plastic parts, boards and foams, mineral wool
  • solvent-free
  • neutral odour
  • non-flammable
  • flexible joint
  • moisture resistant

  • bonding thermal and acoustic insulation materials
  • bonding of decorative elements
  • bonding skirting-boards, floor panels, boards, ceramic tiles

Colour: white

Packaging: 300 ml * 12 pcs

Data sheets:


MFiX Tömítő Spray

MFiX Tömítő Spray is an easy-to-use rubberized utility coating that stops and seals leaks instantly. It fills and seals leaks and cracks, providing a flexible water-tight seal that prevents moisture penetration, rust and corrosion. It has a high-build and high viscosity formula specifically developed to fill cracks, gaps and holes while maintaining superior flexibility even with temperature changes, joints of different materials and UV radiation. It contains almost triple solids of compared to conventional products. Therefore the coating seals quickly and builds a thick coating and allows you to spray enough material at once, without wasting time while the previous layer dries. It maintains its flexibility so it can be used to seal leaks and cracks on metal, vinyl, plastic, PVC, concrete and other surfaces year round. Its coating can be used on everything from sealing leaks on sunroofs,ventilations, drains, ductwork and gutters to sealing small foundation cracks. This versatile coating can be over painted with any paint after it has dried. 


  • Base: high viscosity synthetic rubber polymers
  • Forms a thick 100% waterproof coating
  • Very good adhesion to any material
  • Excellent anti corrosion properties
  • Does not harden completely and remains 100% waterproof, flexible and anti-static
  • Does not sag or drip
  • Can be top-coated with any latex, acrylic or alkyd based paint
  • Ideal for both homeowners and maintenance professionals
  • Has been tested and proven in temperatures from -25 °C to +80°C


  • 6 pcs * 500 ml

Colour: black, white, dark grey, red

Data sheets:


Brik-CEN R-38

Brik-CEN R-38 monocomponent, insulating membrane based on new generation silane-modified polymers. Free of solvents, isocyanates or silicones. Crosslinkable with moisture at room temperature.


  • Excellent workability
  • Tack free
  • Permanently elastic
  • Application temperature: +5 °C - +40 °C.
  • Temperature resistance: -40 °C - +90 °C.
  • Ageing resistance
  • Weather resistance
  • High resistance to UV radiation
  • Low odor
  • Non-shrinking


  • 290 ml
  • 1 kg

Colour: white, black, grey, red

Data sheets:


SG-71 Structural Silicone

SG-71 Structural Silicone is a neutral-curing adhesive, one-part with high modulus and high mechanical properties.

  • Neutral cure selant
  • Odourless and non-corrosive
  • Ultra fast cure
  • Solvent free
  • Extraordinary adhesion power to glass, aluminium, steel
  • High ultrimate tensile strength makes it ideally suited for structural bonding applications
  • Extremely high mechanical strength
  • Resistant to UV radiation and to ozone
  • Great thermal stability: -55 °C - 150 °C
  • Suitable for all types of climates and resistant to strong winds
  • Resistant to chemical agents
  • Unalterable againts aging

Certification: it meets the European standards for Structural Glazing systems applications , according EOTA (European Organisation for Technical Assessment.)
  • EN 13022-2
  • EOTA - ETAG 002

Packaging: 310 ml, 600 ml, 25 kg, 220 kg

Colour: black

Data sheets:


MFiX Extrém Tetőjavító

MFiX Extrém Tetőjavító is one-component, plasto-elastic sealant of wide use, curing by evaporation of solvent.

  • can be applied during rain
  • compatible with bituminous
  • excellent resistance to mould and fungus
  • good adhesion to humid surfaces
  • can be painted
  • excellent adhesion to wide range of construction substrates
  • possibility of applying on surfaces completely submerged under water
  • application temperature: between -10 °C and +40 °C

  • rapid repairs of leaks in roofs and gutters, even during pouring rain
  • sealing flanges of roof windows, chimneys and other roofing treatments
  • cold bonding of roofing foil, membranes and roofing paper
  • sealing grouts of maximum movement accommodation 10%
  • creating joints and seals in boats and at all kinds of applications requiring resistance on permanently action of water
  • sealing corrugated and trapezoidal metal sheets joints

Colour: transparent

Packaging: 280 ml * 12 pcs

Data sheets:


Battery-powered caulking gun

CG-CA312 - maximum 310 ml cartridge
CG-CA602 - maximum 600 ml foil
CG-CA662 - maximum 2*310 ml, 1:1 mixing ratio, side-by-side cartridge


Selsil Plastic Welding

Selsil Plastic Welding is a methylmethacrylate based adhesive suitable for general purpose bonding of a wide variety of materials.

  • Two-component (A component + B component)
  • Excellent adhesion on hard plastics
  • Wide application range in automotive, aviation and marine industry
  • Set time: 10-12 min (depends on temperature)
  • Open time: 5-6 min

Data sheets:


Selsil 5 Min Epoxy Adhesive

Selsil 5 Min Epoxy Adhesive is a two-part adhesive consisting of an epoxy resin and a hardener. It is mixed in equal volumes, the resin and hardener, resulting a tough, rigid, high strength bond in 5 minutes. It doesn't shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching. It can be sanded and drilled.

  • Two-component (A component + B component)
  • Excellent adhesion
  • Good water resistance, outdoor application
  • No cracking, good impact resistance
  • Gel time: 4-10 min average 5 min (depends on temperature)
  • Total cure after 24 hour
  • Application temperature (+5 °C - +35 °C)
  • Shore D: 80 (+/- 2)

Data sheets:


Selsil Epoxy Putty

Selsil Epoxy Putty is a two-component epoxy adhesive, consist of epoxy resin and mercaptane terminated hardener (1-1). Is is suitable for the application of filling cracks, holes, repairing of concrete surfaces,, tanks, drums and containers.

  • Excellent adhesion
  • Good heat resistance
  • Good water resistance (suitable to underwater applications)
  • Excellent adhesion - wood to metal, wood to glass and wood to ceramic
  • No shrinkage and volume loss

Data sheets:


RAL Sealing Tape External

Application area: used for protecting window and door joints and building structures against moisture

Material: 2 x acrylic, 1 x butyl

  • 70 mm x 25 m
  • 100 mm x 25 m
  • 150 mm x 25 m


RAL Sealing Tape Internal

Application: used for protecting window and door joints and building structures against moisture

Material: 2 x acrylic, 1 x butyl

  • 70 mm x 25 m
  • 100 mm x 25 m
  • 150 mm x 25 m


C-22F Oxim Base Silicone

C-22F oxim base silicone is one-component, low modulus, high elasticity and movement capability neutral cure silicone sealant that reacts with the atmospheric moisture producing a flexible rubber extremely resistant. The product offers excellent adhesion to a wide range of substrates without priming and is UV radiation, weather and ageing resistant. Contains a fungicide additive which protects the silicone against fungal and bacterial growth.

  • Multi-purpose building silicone
  • High movement capability (± 25%) and low modulus
  • Non-corrosive to metals
  • Excellent adhesion to a wide range of porous and non-porous substrates
  • Compatible for sealing surfaces in contact with foodstuffs

Data sheets: